Rails, Mounts and Adaptors

NcSTAR 3/8 in Dovetail to Picatinny Rail Adapter Rail-Short

• 3.75 inch overall length for those shorter 3/8 inch Dovetail rails

• Low Profile rail for mounting Optics as low as possible

• Black Anodized Aluminum Construction

• Mounting tool included

• Includes two integrated set screws to lock the rail in place

Vism KeyMod Accessory Rail-Short-3 Hole

• Short rail covers 3 KeyMod slots; Mounts with two KeyMod screws

• 5 Slot Picatinny rail

• Rounded profile rail ends for a more comfortable hold when used as a hand stop

• Perfect for mounting Accessories with Weaver/ Picatinny mounts like flashlights and lasers to your KeyMod handguards

• Black Anodized Aluminum Construction

Caldwell AR Picatinny Rail Adapter Plate

• Utilizes both shoulder sling and pic rail mounted accessory at the same time

• Adjust the tension on front/rear with T20 screws

• Change the vertical angle of the adapter

• Align with the barrel instead of the stock

• Constructed of steel and nylon

Vism M-LOK Covers-18 pack-Black

• Made from rubber material that is textured to provide a comfortable and sure grip surface

• Easy to install; Lift rear hinged half and slide the front shoe into the M-LOK slot, press down on the rear hinged section to lock cover in place

• Heat resistant material will insulate the M-LOK handguard from rapid sustained semi-auto fire

• Comes in a pack of 18

• Hinge pin can be removed from the M-LOK Slot cover and can be reassembled and mixed up with the other slot cover colors for a custom camo look

Vism M-LOK Accessory Rail-Short

• Short rail covers 1½ M-LOK slots; Mounts with two screws and M-LOK compatible T-Nuts

• 5 Slot Picatinny rail

• Rounded profile rail ends for a more comfortable hold when used as a hand stop

• Perfect for mounting Accessories with Weaver/ Picatinny mounts like flashlights and lasers to your M-LOK handguards

• Black Anodized Aluminum Construction

NcSTAR 45 Degree Off-Set Rail Mount-Weaver Style

• Offset Rail allows the attachment of laser/flashlight mounts, red dot sights or other accessories

• Keeps accessories off to the side so they don't interfere with vertical grips, handguards, or optics

• Ergonomic  design gives easy access to on/off switches for Flashlights, Lasers, or Red Dot sights

• High grade aluminum construction

• Allen bolt secures mount to weaver/Picatinny style rail

ProMag Archangel OPFOR AA9130 Forend Rail-Black

• Picatinny rail for the forend of the Archangel OPFOR AA9130, AA98, AAT3 stocks

• Utilizes the ventilation holes on the underside of the forend

• The rail mounts securely and is designed to be parallel to the barrel in the horizontal plane

• Allows for more precise mounting of lasers or lights

• Overall length 5 inches

• Made of black polymer

• Made in the USA

NcSTAR AR15 Carbine Length Quadrail Handguard

• MAR4S, AR15/M4 Carbine Length Quad Rail Handguard; 3rd Gen MAR4S is now lighter and has a slimmer profile than earlier models

• Fits onto AR15 Carbines/M4 with the carbine length gas system using the GI Handguard Cap and Delta Ring

• The Solid Quad Rail provides the steady platform attaching: Optics, Lasers, Flashlights, Vertical Grips, Bipods, and other accessories

• Very easy to install with four Allen head screws and the provided mounting tool; No gunsmithing required, drop-in fit

• Black Anodized finish, Aluminum construction

Browning BAR BLR Integrated Scope Mount System Med 1in Matte

• Machined from 7000 series aluminum for high strength and durability

• Integrated design eliminates alignment problems and the possibility of a loose connection between bases and rings

• .500 in Medium height for scopes up to a 50mm objective with a standard barrel contour

• Only compatible with BAR and BLR rifles. 

Browning X-Bolt Integrated Scope Mount High 30mm Matte

• Integrated Scope Mounts unitize the ring and base into a single unit machined from 7000 series aluminum to eliminate alignment problems and possible loose connections between bases and rings

• Use the .400 in Low ring height for scopes up to a 44mm objective with a standard barrel contour

• Use the .500 in Medium ring height for scopes up to a 50mm objective with a standard barrel contour

• Use the .600 in High ring height for scopes up to a 56mm objective with a standard barrel contour

• Important: Compatible with Browning X-Bolt rifles only

Browning X-Bolt Int Scope Mount Sys Med 1 in Bronze Cerakote

• Integrated Scope Mounts unitize the ring and base into a single unit machined from 7000 series aluminum to eliminate alignment problems and possible loose connections between bases and rings

• Use the .400 in Low ring height for scopes up to a 44mm objective with a standard barrel contour

• Use the .500 in Medium ring height for scopes up to a 50mm objective with a standard barrel contour

• Use the .600 in High ring height for scopes up to a 56mm objective with a standard barrel contour

• Available for both 1in and 30mm

• Important: Compatible with Browning X-Bolt rifles only

Browning X-Bolt Int Scope Mount Sys Med 30mm Bronze Cerakote

• Integrated Scope Mounts unitize the ring and base into a single unit machined from 7000 series aluminum to eliminate alignment problems and possible loose connections between bases and rings

• Use the .400 in Low ring height for scopes up to a 44mm objective with a standard barrel contour

• Use the .500 in Medium ring height for scopes up to a 50mm objective with a standard barrel contour

• Use the .600 in High ring height for scopes up to a 56mm objective with a standard barrel contour

• Available for both 1in and 30mm

• Important: Compatible with Browning X-Bolt rifles only

Browning AB3 2-Piece Weaver Style Scope Bases Matte

• Lightweight, strong, and solid

• Industry standard for hunting rifles

• High quality aircraft grade alloy

• Work with Browning rings or just about any other Weaver-style rings you want to mount on them

• Fit AB3 rifle only

Browning BAR BLR Integrated Scope Mnt System Med 30mm Matte

• Machined from 7000 series aluminum for high strength and durability

• Integrated design eliminates alignment problems and the possibility of a loose connection between bases and rings

• .500 in Medium height for scopes up to a 50mm objective with a standard barrel contour

• This system is only compatible with BAR and BLR rifles. 

Leapers UTG PRO Ruger 10 or 22 Picatinny Rail Mount

• Proudly Designed and Made in USA

• Enhanced Precision, Material Strength and Quality Control

• Precision Machined from Aircraft Grade Aluminum with Matte Black Hard Coat Anodize

• 4.67in Overall Length w 11 Picatinny Rail Slots for Dot Sights, Rear Sights, and Flex Positioning of Magnified Optics for Proper Eye Relief Adjustment

• Low Profile Design with U-cut for Weight Reduction

• Contoured Bottom Perfectly Fits Ruger 10/22 with Drilled and Tapped Receiver

• Includes Assembly Screws for Simple and Friendly Installation, No Gunsmith Required

Leapers UTG PRO 3.14in Keymod Picatinny Rail Section 8 Slots

• Proudly Designed and Made in USA

• Mil-spec 8-slot Picatinny Rail Section Fully Compatible with Any Keymod Mounting Platform

• Features Optimal Profile 0.375 inch Saddle Height for Versatile Accessory Attachments and Modular Applications

• Innovative Rail Edge Design Providing True Continuous Rail Slots When Connecting Multiple Rail Sections

• Precision Machined from Aircraft Grade Aluminum Alloy with Hard Coat Anodizing

• Includes Required Keymod Compatible Steel Locking Nuts, Steel Allen Screws and Allen Wrench for Installation

Leapers UTG PRO 1.57in 4 Slot Keymod Picatinny Rail Section

• Proudly Designed and Made in USA

• Mil-spec 4-slot Picatinny Rail Section Fully Compatible with Any Keymod Mounting Platform

• Features Optimal Profile 0.375 inch Saddle Height for Versatile Accessory Attachments and Modular Applications

• Innovative Rail Edge Design Providing True Continuous Rail Slots When Connecting Multiple Rail Sections

• Precision Machined from Aircraft Grade Aluminum Alloy with Hard Coat Anodizing

• Includes Required Keymod Compatible Steel Locking Nuts, Steel Allen Screws and Allen Wrench for Installation

Troy M-LOK QD Mount

• Installs easily and securely on most M-LOK AR-15 handguards

• Accommodate a full range of accessories utilizing a swivel hole for installation

Troy Battlerail M-LOK 5.56 Aluminum 13 in-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Battlerail M-LOK 5.56 Aluminum 13 in-FDE

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Battlerail M-LOK 5.56 Aluminum 15 in-FDE

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Battlerail M-LOK 5.56 Aluminum 9 in-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Battlerail M-LOK 308 HP Aluminum 13 in-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits .308 caliber

Troy Battlerail M-LOK 308 LP Aluminum 13 in-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits .308 caliber

Troy Battlerail M-LOK 308 HP Aluminum 15 in-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits .308 caliber