Troy Industries

Troy Ambidextrous Bolt Release

• Streamlines firearm clearing

• Reloads after a malfunction

• Improved control without hand changeovers

• Easily release bolt with either left or right hand

• Streamlines firearm clearing and reloads after a malfunction

• Improved control without hand changeovers

Troy Ambidextrous Extended Charging Handle 5.56

• Designed for M16, AR15, and M4 type rifles

• Ambidextrous design allows users to charge their rifle with either hand, making operation under extreme conditions less complicated

• Handle tabs are enlarged, increasing the surface area making it easier to operate

Troy Enhanced Trigger Guard

• Allows shooter to access trigger while wearing a glove

• Rotates down much like a standard trigger guard

• Fills width gap on receivers

• Fills width gap on receivers

• No sharp edges or corners

• Fills width gap on receivers

• No sharp edges or corners

Troy Hand Stop Assembly 2.2 in-Grey

• Low profile, rugged, and ergonomically engineered to reinforce tactical shooting positions such as the C-grip and barricades

• Billet machined from T6 Aluminum

• Weighs in at less than 1.5 oz

• Attaches to any M-LOK interface

• Mounting hardware included

Troy OEM Sling Mount-FDE

• Hardened aircraft aluminum with stainless steel push down button

• Mount is flat dark earth

• It accepts SSQD Swivel

• Supports Sling size up to 1 ¼”

• stainless steel push down buttons

• weighs in at 1.78 ounces

Troy Battlerail M-LOK 5.56 Aluminum 13 in-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Battlerail M-LOK 308 HP Aluminum 15 in-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits .308 caliber

Troy Battlerail SOCC92 10.25 in Spec Ops M-LOK Low Pro-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Battlerail SOCC92 12.5 in Spec Ops M-LOK Low Pro-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Battlerail SOCC92 12.5 in Spec Ops M-LOK Low Pro-FDE

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Battlerail SOCC92 15.125 in Spec Ops M-LOK Low Pro-Blk

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Battlerail SOCC92 9.25 in Spec Ops M-LOK Low Pro-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Semi Auto Direct Thread Ambi Safety Selector Assembly

• Allows operation from either side of the lower receiver

• Both levers designed similar to a standard lever for positive operation

• Ambidextrous design

Troy Bravo Battlerail 13 in-Black

• Feature full length Mil-Std Picatinny Rails and a four clamp locking system that mounts to the factory barrel nut

• Allows for enhanced accuracy and reduced heat transfer

• Made from hardened aircraft aluminum with stainless steel components

• Mil-Spec hardcoat anodizing finish

Troy Battlerail M-LOK 5.56 Aluminum 13 in-FDE

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Battlerail M-LOK 308 LP Aluminum 13 in-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits .308 caliber

Troy Battlerail Rail Section M-LOK 3 in

• Install quickly, easily and securely on M-LOK handguards

• Accommodate a full range of accessories

• Eliminates typical backer plate to boast a lower profile

Troy Non-Padded T-Sling-FDE

• Provides rapid adjustment to either lengthen or shorten the sling simply by pulling on the easily reachable Troy Biothane handle

• Rapid adjustment allows for smooth and easy shoulder transitions no matter your shooting position

• Removes possible sand hazzards such as loops and or tails

• Utilizes polymer buckles for silent scratch free operation

• Total length: 85 inches

• Weight: 4.32 ounces

Troy Hand Stop Assembly 2.2 in-Black

• Low profile, rugged, and ergonomically engineered to reinforce tactical shooting positions such as the C-grip and barricades

• Billet machined from T6 Aluminum

• Weighs in at less than 1.5 oz

• Attaches to any M-LOK interface

• Mounting hardware included

Troy Battlerail M-LOK 308 HP Aluminum 13 in-Black

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits .308 caliber

Troy Battlerail SOCC92 9.25 in Spec Ops M-LOK Low Pro-FDE

• Utilize the M-LOK attachment system for exceptional cooling

• Lightweight with a snag-free ultra-low profile design

• Ideal for maneuverability in close quarters

• Machined from hardened aircraft aluminum with stainless steel components and finished in Mil-Spec hard coat anodizing

• Easily mounts to a standard barrel nut

• Fits 5.56 caliber

Troy Fixed M4 Front Sight-Black

• Provide rock solid stability and dead-on accuracy in a fixed sight

• Permanent, rail-mounted alternative to a standard A2 sight

• Provides a continuous zero

• Unflinching durability

• Designed to work on same plane rail systems

Troy Fixed Rear Sight-Black

• Designed to work on same plane rail systems only

• Hardened T6 aircraft aluminum construction with stainless steel components

• Fits all M4, M16, AR15, AR10 variants

• A permanent rail mounted alternative to a standard A2 rear sight or carry handle

• Black

• Provides constant access to fixed sights that continuously hold their zero

• Extremely durable and reliable

Troy Non-Padded T-Sling-Multicam

• Provides rapid adjustment to either lengthen or shorten the sling simply by pulling on the easily reachable Troy Biothane handle

• Rapid adjustment allows for smooth and easy shoulder transitions no matter your shooting position

• Removes possible sand hazzards such as loops and or tails

• Utilizes polymer buckles for silent scratch free operation

• Total length: 85 inches

• Weight: 4.32 ounces

Troy SOCC Ambi Charging Handle 5.56

• Designed specifically for the AR platform

• Ambidextrous design allows users to charge their rifle with either hand, making operation under extreme conditions less complicated

• Made from aircraft grade aluminum

• Mil-Spec anodized for ultra-durability and longevity

• Simple upgrade to significantly increase the function of your rifle