Lee Precision

Lee Precision Powder Measure Kit

• 15 graduated powder dippers from .3cc to 4.3cc

• Slide card included has powder dispensing chart

• Dipper data revised April of 2012

• A great tool for reloading

• The scoops are sturdy, and pour well

Lee Precision 90814 Case Length Gauge Holder 6.5 Creedmoor

• 6.5 Credmoor case length Gauge

• Easy way to trim to length and square the case Mouth

• Use with the Case Conditioning Kit, Cutter and Lock Stud or 3 Jaw Trimming Kit

• Trim to length 1.900 to 1.920 inches

• Made in the USA

Lee Precision Cutter and Lock Stud

• Use to trim cases

• Can be used by hand or with an electric drill

• Works on all brass less than .475 base diameter

• For trimming cases with a base diameter larger than .475, order the large cutter and lock stud

Lee Precision 308 Factory Crimp Die

• Crimps the bullet in place more firmly than any other tool

• Ensures more uniform pressure curve and less velocity variation

• For use with 308 Winchester or 303 Savage

Lee Precision 91035 FL Size Die 223 Rem

• For use with 223 Remington

• Die box included

Lee Precision 223 Rem Gauge Holder

• 223 Remington and 223 Ackley length Gauge

• Easy way to trim to length and square the case Mouth

• Use with the Case Conditioning Kit, Cutter and Lock Stud or 3 Jaw Trimming Kit

• Trim to length 1.730 to 1.760 inches

• Made in the USA

Lee Precision Ingot Mold

• Made of rustproof aluminum

• Casts 0.5 and 1 lb. ingots (2 of each)

• Perfect for re-melting and alloying

Lee Precision Primer Pocket Cleaner

• Double ended design cleans both large and small primer pockets so that primers can be fully seated for better accuracy and safety

• Will not work on the 204 Ruger or 50 BMG brass

Lee Precision 91037 FL Size Die 22-250 Rem

• For use with 22-250 Remington

• Die box included

Lee Precision 308 Win Gauge Holder

• 308 Winchester case length Gauge

• Easy way to trim to length and square the case Mouth

• Use with the Case Conditioning Kit, Cutter and Lock Stud or 3 Jaw Trimming Kit

• Trim to length 1.995 to 2.105 inches

• Made in the USA

Lee Precision Breech Lock Pro Shell Plate 2

• Works with 45 ACP, 45 GAP, etc. cartridges

Lee Precision Charging Die Kit

• Short and Long Charging Dies included in this kit for use with the Auto-Disk, Pro Auto-Disk and Auto-Drum Powder Measure

• Works with cases .860 to 2.620 inches long, and bullet diameters .223 and larger

• Works the same as the pistol Powder Through Expanding Die, except it does not expand the case mouth

• Rifle case expansion is done in the Sizing die

Lee Precision 6.5 Grendel Pacesetter

• Includes Full Length Sizing Die, Easy Adjsut Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, instructions and load data

Lee Precision 91181 Bullet Seating Die 9MM Lug

• 9mm Luger Bullet Seating Die

• Includes Die Only

Lee Precision 91052 FL Size Die 6.5 Carcano

• For use with 6.5 Carcano Rifle

• Die box included

• .263 in diameter easy x expander is installed

• The original .268 in bullet supply is limited, and requires an oversized expander, product number 91857

Lee Precision Handgun Micrometer Adjust Screw

• Replaces the original adjusting screw on any Lee bullet seating die

• Infinitely adjustable

• Easy to read laser engraved divisions represent .001in one thousandth of an inch

• Integrated friction ring eliminates annoying clicks that prevent splitting thousandths

• Can be easily transferred to other Lee Bullet Seating Dies

Lee Precision Large Caliber Rifle Micrometer Adjust Screw

• Replaces the original adjusting screw on any Lee bullet seating die

• Infinitely adjustable

• Easy to read laser engraved divisions represent .001in one thousandth of an inch

• Integrated friction ring eliminates annoying clicks that prevent splitting thousandths

• Can be easily transferred to other Lee Bullet Seating Dies

Lee Precision 91185 Bullet Seating Die 380 Auto

• 380 Auto Bullet Seating Die

• Includes Die Only

Lee Precision 91922 Pacesetter Dies 8.6 Blackout

• 8.6 Blackout Pacesetter 3-Die Set

• Includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, and instructions

• Load Data is not yet available for this new cartridge, so a powder dipper is not included

• Contact your favorite powder manufacturer for load data

• Select this die set if you are reloading mixed range brass

Lee Precision Pacesetter Dies .308

• Convenient Carrying Case

• Perfect Die Set for a .308

• High Quality Construction

Lee Precision PaceSetter 3 Die Set 224 Valkyrie

• 224 Valkyrie Pacesetter 3-Die Set

• Includes Full Length Sizing Die, Easy Adjust Dead Length Bullet Seating Die, Factory Crimp Die, Universal Shell Holder, Powder Dipper and Instructions with Load Data

Lee Precision Commercial Mold Handles

• Fits Lee 6-Cavity Molds

• Also fits most other brands of single and double cavity molds

Lee Precision 90047 Sizing Die Kit .357

• Standard 7/8 x 14 threads that will fit any reloading press

• Classic .357 bullet sizing kit

• NOTE: If using this kit on the APP or Deluxe APP, customers will need to supply their own catch container

Lee Precision 12-Gauge Sizer Load All

• Replacement sizer ring for 12 gauge Load-All II

Lee Precision No.3 Shell Holder

• Used in Lee hand priming tools

• Intended for 32 Winchester Special, 7.65x53 Argentine Mauser, 45 Winchester Magnum, and similar cases