NcSTAR

NcSTAR 3/8 in Dovetail to Picatinny Rail Adapter Rail-Short

• 3.75 inch overall length for those shorter 3/8 inch Dovetail rails

• Low Profile rail for mounting Optics as low as possible

• Black Anodized Aluminum Construction

• Mounting tool included

• Includes two integrated set screws to lock the rail in place

NcSTAR AK/SKS Stripper Clips-20 Pack

• 7.62 X 39mm Stripper Clips

• Holds 10 Rounds

• Steel construction

• Compatible with NcSTAR AK/SKS Quick Magazine Loader (AAKC), not included

• Weight: 0.4 ounce each

NcSTAR 1 inch Lockable Sling Swivel Pair-Black

• To Unlock, unscrew out the knurled thumb nut, push in and rotate side arm 90 degrees to open sling swivel mount

• Place bar through Sling Stud on long gun, rotate side arm over bar and screw in the knurled thumb nut to lock the sling swivel mount

• Metal Construction, painted Black

• Width: 1.6 inches outside width, (1.3 inches inside loop)

• Weight: 0.4 oz. each, (0.8 oz. total for both)

• Mounts onto most standard sling studs found on most hunting rifles and shotguns

NcSTAR Essential Gunsmith Tool Kit

• Includes: mallet with nylon and brass ends, small needle nose pliers, triangle mill file, 1/4 in hex screw driver

• Also includes: Gunsmith bench block, safety glasses, and soft carry case

• 30 each 1/4 inch bits: Flat blade, Phillips, hex, torx, square, adapters

• Jeweler's screw drivers 6 pcs.

• Steel punch set, center punch, roll pin punches, and drift punches

• Brass 5 pcs., Polymer punch 2 pcs

NcSTAR 150 Lumen LED Compact Flashlight QR w Strobe

• Strobe Flashlight feature will disorientate your target and extend battery life

• Push Button Rubber Switch on the left side of flashlight and a Push Button Rubber Strobe Button on the right side of the flashlight

• 3 Watt Bright CREE LED

• 150 Lumens Peak Output

• Uses 1 CR2 Lithium Type Battery (Included)

NcSTAR Tactical Red Green Blue Dot w Cant Weaver Mount Tan

• LED (Light Emitting Diode) 100 percent safe for the eyes; Unlimited Eye Relief for flexible mounting

• Multi-position rheostat knob for three brightness settings for each of the Red, Green, Blue Dot reticles

• Includes 30mm cantilever mount that will mount onto Weaver, Picatinny, MIL-STD1913 type rails; Reflex Dot Sight is set at proper AR15 1½ in height

• Optic height will allow a more comfortable and natural cheek rest on your AR15/M4 stock.

• Includes heavy duty flip up lens, spare battery, and mounting tool

• Powder coated Tan body and aluminum construction

NcSTAR XRS 2-7X32 Compact Scope Blue ILL. Mil-Dot w Weaver

• Large 34mm Scope Tube Diameter allows a bright clear image of your target

• Blue Illuminated Scope Reticle for use in low light conditions with 7 Brightness settings

• Adjustable Locking Quick Release Mount allows you to attach the scope to about any Weaver/ Picatinny type rails

• Base Mount is convertible to an AR-15 Carry Handle Mount with see through channel for Iron Sights

• Includes 4 separate Upper Scope Rings: 2 each Lightweight Rings, Dual Side Rails Accessory Ring, and a Low profile Micro-Dot Reflex Sight Base

• Thumb nut and bolt hardware included

NcSTAR Ult Sighting System GEN2 3-9X42 P4 Sniper w Micro Dot

• Locking Quick Release mount; More compact QR Lever

• Scope Centerline height raised to AR15 1½ inch scope height; More comfortable scope height for AR15s and more room for low profile Rear BUIS

• Lowered BDC Turret height, for lower mounting height for the optional new 34mm Micro Dot mount and optic

• Blue Illumination

• Dual Illuminate Reticle in Blue and Green, with multiple brightness settings for each color

Vism AK SKS Sling-Green

• Replica canvas AK/SKS military style sling, OEM style

• Attaches to AK and SKS type rifles

• Adjustable for length with metal slider; Max length 42 inches

• All metal hardware for durability

• Double stitched and reinforced sewn ends

• Great option for replacing missing or worn factory slings

NcSTAR Red Dot Reflex Sight Weaver Base

• LED (Light Emitting Diode) 100% safe for the eyes; Unlimited Eye Relief for flexible mounting

• Mechanical On and Off switch mounted to the side of the optic for easy access

• Integrated Weaver base mount will mount onto virtually any firearm with a Weaver, Picatinny, MIL-STD 1913 type rails

• Includes extra battery and mounting tool

• Black Polymer and aluminum mount construction

NcSTAR AR15 Carbine Length Quadrail Handguard

• MAR4S, AR15/M4 Carbine Length Quad Rail Handguard; 3rd Gen MAR4S is now lighter and has a slimmer profile than earlier models

• Fits onto AR15 Carbines/M4 with the carbine length gas system using the GI Handguard Cap and Delta Ring

• The Solid Quad Rail provides the steady platform attaching: Optics, Lasers, Flashlights, Vertical Grips, Bipods, and other accessories

• Very easy to install with four Allen head screws and the provided mounting tool; No gunsmithing required, drop-in fit

• Black Anodized finish, Aluminum construction

NcSTAR .223 Cartridge Red Laser Bore Sighter

• Fits .223 Remington Chambers

• Factory zeroed laser

• Drop into chamber to boresight

• Projects laser through barrel for fast zeroing

• Brass construction

• Batteries included

NcSTAR Tactical Pistol Red Laser for Accessory Rail-Aluminum

• Red laser: Freq. 635-655nm, Class IIIA laser

• Maximum output: less than 5mw

• Weaver style mount will fit most weaver and Picatinny type rails

• Fully adjustable for windage and elevation

• Side to Side On/Off switch

• All aluminum finish with black anaodized finish

• Requires 2 AG13 button cell batteries (included); Includes mounting tools

Vism Single Point Bungee Sling-Black

• Designed for fast attachment and removal

• Great for primary rifle for full mobility but retains weapon if need arises to transition to secondary weapon

• Heavy duty, fully adjustable

• Heavy duty bungee cord for complete comfort and stability

• Single point clamp attachment will fit AR style single point yoke rings

NcSTAR AR15 Golf Ball Launcher

• AR-15/M16 Golf Ball Launcher

• Attaches to Standard AR-15/M16 Threaded Barrels

• Uses Blank Ammunition to propel Golf Balls 400+ yards

• DO NOT use live ammo

NcSTAR AR15 QR WeaverCant Scope Mnt RearRing-30MM-1in Insert

• AR-15/M16 Quick Release Weaver Style Cantilever Mount with Detachable Rear Ring

• Includes Mounting Hardware

• Mount rings are 30mm with 1 inch inserts, and the Mount Rear Ring is on a dovetail so you can adjust the spacing for a customized fit

• Rear ring is also removable so you can set up your Red Dot Sight to co-witness with your weapon iron sights

• Constructed of hard anodized aluminum with solid steel

NcSTAR 3W 150 Lumen LED Flashlight QR w Strobe

• Strobe Flashlight feature will disorientate your target and extend battery life

• Push Button Rubber Switch on the left side of flashlight and a Push Button Rubber Strobe Button on the right side of the flashlight

• 3 Watt Bright CREE LED

• 150 Lumens Peak Output

• Uses 1 CR123A Lithium Type Battery (Included)

NcSTAR 3X Magnifier with Flip to Side 30MM QR Mount

• MAGFL Flip to Side Mount places the center of the 3X Magnifier at 1½ inches above the rail, a popular AR15 Optics height

• Prismatic lens for a clear high definition image quality

• Fully Adjustable for Elevation and Windage, to get your Primary optic’s reticle centered in Magnifier

• Quick Focus Ring to get your Primary optic’s reticle in focus

• Quick Release 30MM Flip to Side Mount allows shooter to flip the Magnifier off to the side

• Shooter can flip the magnifier back directly behind reflex optic for 3X magnification, to get a closer view of the target

NcSTAR Universal 12 Gauge Shotshell Side Saddle

• Capable of holding 4 or 6 shells; Attaches to frame of shotgun by hook and loop fastener to allow easy removal or installation of extra side saddles

• 4/6 split design allows you to configure the Side Saddle to fit onto Pump Shotguns with longer handguards that go over the receiver in Open position

• Designed to fit onto the side if the receiver for majority of Shot gun receivers in the market place; Installs with hook and loop fastener

• Load multiples of them up with different types of shells, quickly change out ammo load out in a shooting stage or replenish an empty one on the go

• Industrial Strength hook and loop fastener will not scratch the finish of shotgun; Custom cut the hook and loop fastener to fit your shotgun model

• Configure this Side Saddle to hold 4 Shot Shells for maximum clearance of the Pump Action

NcSTAR Red Laser Sight w Weaver Mount-Black

• Red laser: Freq. 635-655nm, Class IIIA laser

• Maximum output: less than 5mw

• Weaver style mount will fit most weaver and Picatinny type rails

• On/Off Rear Cap Switch is Easily turned On or Off with your Trigger Finger.

• All aluminum construction with black anaodized finish

• Uses 3 AG13 button cell batteries (included)

• Includes mounting hardware

NcSTAR Red Dot Reflex Sight w 4 Reticles Weaver Base-Black

• LED (Light Emitting Diode) 100% safe for the eyes. Unlimited Eye Relief for flexible mounting

• Red colored Four Reticle set: Dot, Bullseye, Cross, Bullseye

• Multi-position rheostat knob for seven brightness settings

• Integrated mount will mount onto virtually any firearm with a Weaver, Picatinny, MIL-STD 1913 type rails

• Black Anodized Aluminum Construction

NcSTAR AK/SKS Front Sight Adj. Tool

• Adjusts both windage and elevation on front sight

• Steel construction

• Extended arms for better grip and leverage

• Works with both AK and SKS front sights

• T-handle slot interfaces with the front sight post to adjust the front sight's elevation

NcSTAR Aluminum Dot Sight-Red-GEN II-Black

• LED (Light Emitting Diode) 100% safe for the eyes; Unlimited Eye Relief for flexible mounting

• Mechanical On and Off switch mounted to the side of the optic for easy access

• Integrated Weaver base mount will mount onto virtually any firearm with a Weaver, Picatinny, MIL-STD 1913 type rails

• Includes extra battery and mounting tool

• Black Anodized Aluminum Construction

NcSTAR 2 Point and 1 Point Sling-Black

• Two-point sling that can be reconfigured to a single-point sling with metal spring clips

• Sling has metal D-rings at each end for attaching either metal clips

• Plastic quick connect buckles to quickly detach sling from firearm and to re-connect sling back to firearm

• Bungee shock cord on each end of sling to absorb shock of firearm bouncing when not shouldered

• 1.25 inch webbing adjustable from 55 inches to 72 inches

NcSTAR AR15 Detachable Carry Handle

• AR-15/M16 Detachable Carry Handle

• Designed to fit most Mil Spec Picatinny Rails

• Large Knurled Mounting bolts/nuts allow for easy mounting and dismounting

• Rear Sight is adjustable for windage and elevation

• Constructed of Hard Anodized Aluminum